View XMLCTW-A0-0000-00C3AAAA1_7627999.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds58 rev 2a product family data sheet cree ? xlamp ? xm-l color leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description the xlamp xm-l color l e d is a multi-color le d that provides high lumen output in a small package. compared to discrete l e ds, xlamp xm-l color l e ds reduce the distance between l e d die, creating a small optical source for excellent optical control and effcient color mixing. xlamp xm-l color l e ds can reduce le d system complexity by reducing the number of components required. cree xlamp xm-l color l eds bring high performance and quality of light to a wide range of lighting applications, including color-changing lighting, stage lighting, architectural lighting, indoor directional lighting, and entertainment lighting. features ? available in red, green, blue and white in a single 5 mm x 5 mm package ? maximum drive current per l ed die: 1 a ? individually addressable leds ? refow solderable C jedec j-std-020 ? e lectrically neutral thermal path cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 table of contents characteristics - complete package ................................... 2 characteristics - per l ed die ....... 2 flux characteristics .................... 3 relative spectral power distribution ............................... 3 relative flux vs junction temperature ............................. 4 e lectrical characteristics ............. 4 relative flux vs. current ............ 5 typical spatial distribution .......... 5 bin and order-code formats ....... 6 performance groups C brightness ................................ 6 performance groups C chromaticity ............................. 7 performance groups C dominant wavelength .............................. 7 standard order codes and bins ... 8 refow soldering characteristics .. 9 mechanical dimensions .............. 10 tape and reel .......................... 11 packaging ................................ 12
2 2 characteristics - complete package the following table lists the product characteristics for the xlamp xm-l color l e d package, measured with all le d dies on simultaneously and each le d die connected to independent drive circuits at 350 ma. characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 3.5 viewing angle (fwhm) degrees () 130 e sd withstand voltage (hbm per mil-std-883d) v 8000 le d junction temperature c 150 characteristics - per led die the following table lists the product characteristics for each l ed die within the xlamp xm-l color led package. characteristics unit minimum typical maximum temperature coeffcient of voltage - red mv/c -1.8 temperature coeffcient of voltage - green mv/c -4 temperature coeffcient of voltage - blue, white mv/c -3 dc forward current - red, green, blue, white ma 1000 forward voltage (@ 350 ma, 25 c) - red v 2.25 2.6 forward voltage (@ 350 ma, 25 c) - green v 3.3 3.9 forward voltage (@ 350 ma, 25 c) - blue, white v 3.1 3.7 xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
3 3 flux characteristics, (t j = 25 c) the following tables provide several base order codes for xm-l color l e ds. for a complete description of the order code nomenclature, please refer to the bin and order code formats section (page 6). color cct / dominant wavelength range base order codes min. luminous flux @ 350 ma order code min. max. group flux (lm) color + cool white red 620 nm 630 nm c3 45.7 XMLCTW-A0-0000-00C3AAAA1 green 520 nm 535 nm 87.4 blue 450 nm 465 nm 13.9 cool white 5700 k 8000 k 100 color + neutral white red 620 nm 630 nm c2 45.7 xmlctw-a0-0000-00c2aaab1 green 520 nm 535 nm 87.4 blue 450 nm 465 nm 13.9 neutral white 3700 k 4300 k 80 notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 1 nm on dominant wavelength measurements. ? flux and chromaticity are measured with each led die connected to independent drive circuits at 350 ma. the fux and chromaticity of each l ed die within the xlamp xm-l color le d package are measured individually. relative spectral power distribution (i f = 350 ma per led die, 25 c) the following graph represents typical spectral output of the xlamp xm-l color l e d with each le d die on independently. relative spectral power distribution (if = 350 ma per led) the following graph represents typical spectral output of the xm-l rgbw color led with each led on independently. 0% 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) red green blue white 4000k white 6000k xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
4 4 relative flux vs junction temperature (i f = 350 ma) the following graph represents typical performance of each l ed die in the xlamp xm-l color le d. electrical characteristics (t j = 25 ?c) the following graph represents typical performance of each l ed die in the xlamp xm-l color le d. relative flux output vs. junction temperature (if = 350 ma) the following graph represents typical performance of each led die in the xm-l rgbw led 0% 20% 40% 60% 80% 100% 25 50 75 100 125 150 relative luminous flux (%) junction temperature (oc) red green blue white electrical characteristics (tj = 25oc) the following graph represents typical performance of each led die in the xm-l rgbw led 0 100 200 300 400 500 600 700 800 900 1000 2.0 2.5 3.0 3.5 4.0 forward current (ma) forward voltage (v) red green blue, white xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
5 5 relative flux vs. current (t j = 25 ?c) the following graph represents typical performance of each l ed die in the xlamp xm-l color le d. typical spatial distribution the following graph represents typical output of the xlamp xm-l color l ed with all four le ds on simultaneously. relative intensity vs. current (tj = 25oc) 0% 50% 100% 150% 200% 250% 300% 0 100 200 300 400 500 600 700 800 900 1000 relative luminous flux (%) forward current (ma) red green blue white typical spatial radiation pattern the following graph represents typical spectral output of the xlamp mc-e led with all four leds on simultaneously. 0% 20% 40% 60% 80% 100% - 90 - 60 - 30 0 30 60 90 relative luminous intensity (%) angle (o) xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
6 6 bin and order-code formats bin codes and order codes are confgured in the following manner: order code bin code performance groups C brightness each led die in the xlamp xm-l color led is tested individually for luminous fux and placed into one of the following luminous-fux groups. color group code min. luminous flux (lm) @ 350 ma max. luminous flux (lm) @ 350 ma) red m 45.7 87.4 n 87.4 114 green n 87.4 114 p 114 148 blue f 13.9 39.8 white 2 80 100 3 100 120 4 120 140 ? flux and chromaticity are measured with each l e d die connected to independent drive circuits at 350 ma. sss ccc -bd-hhhh-nnnnnnnnn pa ckage configur ation color ctw = r ed, green, blue, white internal code flux kit r eel size a: individually addressable series xml = xml internal code dominant wave length kit (rgb) chromaticity kit for white sss ccc -b-hhhh-nnnmmkkkk pa ckage configur ation color ctw = r ed, green, blue, white dominant wave length bin for each die (rgb ) chromaticity bin for white die a: individually addressable series xml = xml flux bin for each die (rgbw ) internal code xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
7 7 performance groups C chromaticity (i f = 350 ma per led die) the white l e d die in the xlamp xm-l color le d is individually tested for chromaticity at 350 ma and placed into one of the regions defned by the bounding coordinates shown below. region x y region x y wm .295 .297 wc .316 .332 .308 .311 .317 .319 .310 .300 .308 .311 .298 .288 .306 .322 wb .306 .322 wf .314 .355 .308 .311 .316 .332 .295 .297 .306 .322 .292 .306 .301 .342 we .301 .342 wd .329 .345 .306 .322 .329 .330 .292 .306 .317 .319 .287 .321 .316 .332 wn .308 .311 wg .329 .369 .317 .319 .329 .345 .318 .308 .316 .332 .310 .300 .314 .355 region x y region x y region x y region x y 5a .3670 .3578 5b .3702 .3722 5c .3825 .3798 5d .3783 .3646 .3702 .3722 .3736 .3874 .3869 .3958 .3825 .3798 .3825 .3798 .3869 .3958 .4006 .4044 .3950 .3875 .3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716 performance groups C dominant wavelength the red, green and blue l e d dies in the xlamp xm-l color le d are tested individually for dominant wavelength (dwl) and sorted into one of the dwl bins defned below. color dwl group min. dwl @ 350 ma max. dwl @ 350 ma blue k 450 455 l 455 460 m 460 465 green 2 520 525 3 525 530 4 530 535 red a 620 630 xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
8 8 standard order codes and bins the following tables list standard kit numbers and performance bins. kit numbers completely describe an order codes color or chromaticity bins and luminous fux range. xlamp xm-l color led standard order codes color minimum luminous flux (lm) @ 350 ma* dwl / chromaticity bins kit number group flux (lm) red m 45.7 a 00c3aaaa1 green n 87.4 2, 3, 4 blue f 13.9 k, l, m white 3 100 wc, wd, wf, wg, wb, w e, wm, wn red m 45.7 a 00c2aaab1 green n 87.4 2, 3, 4 blue f 13.9 k, l, m white 2 80 5a, 5b, 5c, 5d for other fux and chromaticity combinations, contact cree or an authorized distributor. * cree xlamp xm-l color order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity or dwl bin restrictions specifed by the order code. 2 cld-ds22.preliminary cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo, and xlamp are registered trademarks of cree, inc. this is a preliminary, non-binding product specifcation provided for informational purposes only and is subject to change without notice. this product is unreleased and is pro vided as is without warranty. preliminary april 29, 2009 flux characteristics (t j = 25c) red, green, blue and white (rgbw) product color confgura- tion min luminous flux (lm) @ 350 ma* dominant wavelength (nm) order code kit code flux (lm) kit code min. max. mc-e color (rgbw) red a5 30.6 a 620 630 mce4ct-a2-0000-00a5aaaa1 green 67.2 a 520 535 blue 8.2 a 450 465 white** 95 a1 wg, wf, wc, wd red a4 30.6 a 620 630 mce4ct-a2-0000-00a4aaab1 green 67.2 a 520 535 blue 8.2 a 450 465 white** 80 b1 5a, 5b, 5c, 5d * cree maintains a tolerance of 7% on fux measurement. ** chromaticity bins for white emitter: this material is the confidential and proprietary information of cree, inc. it may not be used by any individual or entity except for company employees for company business. this material may not be disclosed or reproduced without the prior written conse nt of the company. cree, inc. all rights reserved cree mc rgbw draft rev. v3 date: april 09 200 9 4 2700k 3000k 3500k 4000k 4500k 5000k 5700k 6500k 8000k 10000k w a w b wc wd w e wf w g wh w j wk wm wn wp 3a 3b 3 c 3d 4a 4b 4c 4d 5a 5b 5c 5d 6a 6b 6c 6d 7a 7b 7c 7 d 8a 8b 8c 8d 0.2 7 0.28 0.2 9 0.30 0.3 1 0.3 2 0.3 3 0.3 4 0.35 0.3 6 0.37 0.3 8 0.3 9 0.4 0 0.4 1 0.42 0.4 3 0.44 0.4 5 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 0.50 ccy ccx a1 b1 xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
9 9 reflow soldering characteristics in testing, cree has found xlamp xm-l color leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3 c/second max. 3 c/second max. preheat: temperature min (ts min ) 100 c 150 c preheat: temperature max (ts max ) 150 c 200 c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183 c 217 c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215 c 260 c time within 5 c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
10 10 mechanical dimensions all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 5.000 5.000 3.02 r 2.26 4.78 1.01 1.01 1.01 1.01 .250 4.78 .500 2.782 .500 .500 .500 1 / 1 16.000 b 2500-00185 marketing xml tw marketing spec 8/29/12 d. cronin revisons rev description by date app'd a initial release dc 08/29/12 ck b added anode sign to iso metric dc 10/4/12 ck c corrected dome radius dc 11/15/12 color d1: red d2: green d3: blue d4: white side view top view 1 2 3 4 5 6 7 8 bottom view d1 top view d2 d4 d3 1 2 3 4 5 6 7 8 d8 d7 d6 d5 d4 d3 d2 d1 negative (-) 4 5 4 positive (+) 4 negative (-) 3 6 3 positive (+) 3 negative (-) 2 7 2 positive (+) 2 8 1 negative (-) 1 positive (+) 1 size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 5.000 5.000 3.02 r 2.26 4.78 1.01 1.01 1.01 1.01 .250 4.78 .500 2.782 .500 .500 .500 1 / 1 16.000 b 2500-00185 marketing xml tw marketing spec 8/29/12 d. cronin revisons rev description by date app'd a initial release dc 08/29/12 ck b added anode sign to iso metric dc 10/4/12 ck c corrected dome radius dc 11/15/12 color d1: red d2: green d3: blue d4: white side view top view 1 2 3 4 5 6 7 8 bottom view d1 top view d2 d4 d3 1 2 3 4 5 6 7 8 d8 d7 d6 d5 d4 d3 d2 d1 negative (-) 4 5 4 positive (+) 4 negative (-) 3 6 3 positive (+) 3 negative (-) 2 7 2 positive (+) 2 8 1 negative (-) 1 positive (+) 1 anode recommended pcb solder pad recommended stencil pattern (shaded area is open) size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.000 5.000 0.73 3.02 .250 4.782 .500 .500 .500 1.01 .25 .25 1.01 4.78 3.782 r 2.260 2.9 5.0 .70 .70 1.120 .250 5.0 .250 1.005 1.005 .250 1.120 4.75 1.93 .94 .46 .66 .38 3.96 .61 .74 .46 4.73 1 / 1 16.000 d 2610-00030 xml tw marketing spec 9/14/12 d. cronin revisons rev description by date app'd c corrected dome radius dc 11/15/12 d changed pcb solderpad dimensions dc 11/11/13 recommended pcb solder pad recommended stencil pattern shaded area is open size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.000 5.000 0.73 3.02 .250 4.782 .500 .500 .500 1.01 .25 .25 1.01 4.78 3.782 r 2.260 2.9 5.0 .70 .70 1.120 .250 5.0 .250 1.005 1.005 .250 1.120 4.75 1.93 .94 .46 .66 .38 3.96 .61 .74 .46 4.73 1 / 1 16.000 d 2610-00030 xml tw marketing spec 9/14/12 d. cronin revisons rev description by date app'd c corrected dome radius dc 11/15/12 d changed pcb solderpad dimensions dc 11/11/13 recommended pcb solder pad recommended stencil pattern shaded area is open xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
11 11 tape and reel all cree carrier tapes conform to e ia-481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 12 1.75 4 8 3.35 1 / 1 3.000 b 2402-00012 xm loading spec -- -- -- -- -- -- 06/08/10 d. cronin revisons rev description by date app'd a loaded pocket count was 750 dds 11/8/10 bs b made cathode and anode note larger dc 2/26/12 end start user feed direction cathode side anode side 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.
12 12 packaging label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, qty, reel id label with cree bin code, qty, reel id label with cree order code, qty, reel id, po # label with cree order code, qty, reel id, po # label with cree bin code, qty, reel id unpackaged reel packaged reel boxed reel xlamp xm-l color leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012-2013 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks of cree, inc.

▲Up To Search▲

Price & Availability of XMLCTW-A0-0000-00C3AAAA1

	To Download XMLCTW-A0-0000-00C3AAAA1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .